 |
|
|
E1 to V.35 Converter:
E1/V.35 G.703/E1 interface converter supports the conversion between E1 interfaces
which accord with the ITU-T G.703 standard and V.35 interface. It can receive
synchronous data of 2.048Mbps from E1 network, and transmit the data to router or
other devices. The mode of interface is DCE, and it can be connected with DTE
or DCE devices.
Features:
1) Convert V.35 interface into E1 (2m unframed G.703) interface
2) Support line recovery clock, local clock and equipment clock
3) Support E1 port loop and V.35 port loop
4) E1 (G.703 ) interface support 120? (RJ-45) and 75? (BNC double coaxial)
Specifications:
1) Interface standard: ITU-T G.703, CCITT V.35
2) E1 signal (BNC): In, Out
3) E1 signal (RJ-45): T+, T-, R+, R-, GND
4) Working: asynchronous, lucency transmission
5) E1 interface rate: 2.048Mbps
6) V.35 interface rate: 2.048Mbps
7) E1 port coding: HDB3
8) V.35 port coding: NRZ
9) E1 port transmission: 2km
10) E1 port protection: 1500V electromagnetism isolation
11) V.35 port protection: 600W surge protection, 15KV static protection
12) E1 port type: 120? (RJ-45) and 75? (BNC double coaxial)
13) V.35 port type: DB-25 female or M/34 female
14) Operating temperature: -25 to 70 |
|
|
|
